Flightplan Visualizer 1.23.1

File Description:
Flightplan Visualizer (FV) version 1.23.1. Copyright 2018-2024 by Pelle F. S. Liljendal (pelle@liljendal.dk), all rights reserved. FV comes with 1780 pre-imported AI flightplans (of which 815 are BizJet flightplans, the rest are commercial, government and military). However you are able to import additional (AI) flightplans yourself. Once imported these (AI) flightplans can be visualized on a map-view, and the user will be able to search accross all these. Hence you can use the program as inspiration as to which routes to fly. E.g. you can search across all imported flightplans to find all flights in an A321 flying into/out from LDDU, or simply to look for all flights in a Boeing 747-8F. As a new feature in version 1.23 you can now be employed by the airlines, and assigned flights to fly. Simply run the included installer to install the software. The program will be installed into "C:\Program Files (x86)\Flightplan Visualizer" and all datafiles will be installed into: "C:\Users\[UserName]\AppData\Roaming\FlightplanVisualizer". The program comes with a full manual explaining everything, and a 3 page quick manual to get you started. The first 3 times you run the program the quick manual will automatically open. The forum is hosted here: https://forum.aerosoft.com/index.php?/forum/919-flightplan-visualizer/

Flightplan Visualizer 1.24

Images related to this file:

• flightplanvisualizerinstaller_1_24-1.jpg
• flightplanvisualizerinstaller_1_24-2.jpg
• flightplanvisualizerinstaller_1_24-3.jpg
• flightplanvisualizerinstaller_1_24-4.jpg
• flightplanvisualizerinstaller_1_24-5.jpg

File Description:
Flightplan Visualizer (FV) version 1.24. Copyright 2018-2024 by Pelle F. S. Liljendal (pelle@liljendal.dk), all rights reserved. FV comes with 1823 pre-imported AI flightplans. However you are able to import additional (AI) flightplans yourself. Once imported these (AI) flightplans can be visualized on a map-view, and the user will be able to search accross all these. Hence you can use the program as inspiration as to which routes to fly. E.g. you can search across all imported flightplans to find all flights in an A321 flying into/out from LDDU, or simply to look for all flights in a Boeing 747-8F. Since version 1.23 you can now be employed by the airlines, and assigned flights to fly.

FSTramp v8.84 for MSFS, FSX(-SE), Prepart3D, X-Plane (Win)

File Description: This add-on is an EXE application for Microsoft Flight Simulator and a DLL module for all other simulators. The DLL variant is activated via hotkeys or the simulator menu add-ons or plugins. Window size and layout are configurable for one or more screens. To avoid dazzling, the brightness of the entire application is customizable. Primarily it is a flight management system (FMS) with automatic control from start to landing. This also includes the observance of SID, STAR and Approaches in unmatched quality. The flight plan required for the FMS can be created manually or automatically, interactive changes and additions during the flight are possible. The basis of the flight planner is the 3D world map and the search function for airfields and navigation aids. The FMS by FSTramp relies on the autopilot of the aircraft. In case of incompatibility, the autopilot integrated in FSTramp will be used. This allows FSTramp to control almost all aircraft from airport to airport. The altitude profile of the flight plan, SID, STAR and approach is taken into account. This means that FSTramp extends the often incomplete airport procedures to and from the runway so that they can be flown completely automatically. During the fully automatic flight, the autopilot values ​​for HDG, ALT, VSPEED, SPD and MACH can be manually overridden. This is e.g. useful for being able to react to the instructions of the tower in the final approach without completely stopping the automatic flight. The rotating or north pointing 3D world map with numeric display of the terrain elevation under the mouse arrow is another special feature. It does not need an internet but is synthesized from included height profiles of the globe. The Data of continents, mountains and rivers are included in the setup. Airspaces, Airways, Waypoints and SID, STAR and Approaches are also included in the setup, but can be updated by installing additional AIRAC cycles. Airfields and navigation stations are taken from the simulator. NVIDIA: If the frame rate of the simulator drops sharply about 20 seconds after FSTramp's visibility, the power management of the GPU slows down prematurely. In the NVIDIA Control Panel, change the 'Manage 3D settings - Power management mode' option to 'Adaptive'.

Filename:	fstramp884.zip
License:	Shareware, time limited
Added:	7th July 2023, 04:35:12
Downloads:	70
Author:	Helge Schroeder
Size:	366804kb

GroundAssist 1.5.1

Images related to this file:

• -1.png

File Description:
Supports all flavors of FSX and P3D. Detailed user manual included. Contains two functions that are useful for ground-based operations: * Pushback. Allows user to control the pushback tug, and receive visual feedback regarding speed and turn direction. Optional animated tug model. Optional use of a controller axis to drive the tug. * Taxi Autothrottle. Works similar to an in-flight autothrottle, but meant for taxiing. No more fiddling with throttle controls to find that sweet spot! Throttle levers are uniformly and smoothly operated. No more fiddling with throttle controls to ensure uniform thrust! Version 1.5.1 fixes some tug path following issues, and adds support for tail draggers.

Kneeboard Viewer 10

File Description:
Kneeboard Viewer 10 (KV10) allows the user to open one to ten ‘on-top-windows’ to view programs of choice, such as a web page like SkyVector, or pdf reader, or LittleNavmap, etc., in ‘kneeboard windows’ on top of FSX/P3D/X-Plane/MSFS while flying. The kneeboard windows will stay visible on top of FSX/P3D/X-Plane/MSFS (or most any other application) or may be toggled on and off (shown or hidden) by user selectable keys (or key combinations). A multi-window option allows multiple windows to be controlled by a single key. KV10 works in window or full screen mode. Download includes a KV10 Manual. Program Installation Unzip the KV10 zip file and put KV10.exe and the KV10Settings.ini file in the SAME directory. You can then pin KV10.exe to the task bar or send a shortcut to the desktop for easy start up access.

MSFS P3D FSX FS2004 Flight Analyzer Utility FsQC V6.19

File Description:
FSX Flight Analyzer Utility FsQC v7.20 Flight Data Recorder - with Logbook. FOR: P3D, FSX(Steam) and FS2004 Now MSFS2020 also supported. Very easy to use, just make a flight plan in the simulator or in this utility. (But please read the readme.txt file) What this program does: quickly change the settings of MSFS2020/P3D/FSX/FS2004, such as time, date, fuel, weight, traffic etc. Start a failure sytem, such as gear, flaps, engine, etc. runway detecting system to see wich runways are in use. Quickly look at Airport Info for all possible info such as: ILS, Radio, RW length, Elevation, etc, etc. This is all fully freeware. Full manual at: www.fsqc.eu Only Limited demo for: The flight analyzing/data recording, Logbook and the PDF Flightreport. Flight analysis start recording at the moment when you begin taxiing. It gives you huge information such as: - takeoff- and landing-weight. - takeoff- and landing-roll in m. and ft. - separate fuel consumption in taxi, climb, cruise and descent. - maximum banking in flight. - which speed you using the flaps and gear. - when autopilot on or off. - vertical speed on touchdown. - reverser set after landing. - wich speed you cancel reverser. - bouncing at landing. - graphical landingchart with Touch&Go and Missed Approach. - graphical Climb-, Descent- and Full- flightchart. - and lots of more. You can better look the example of the pdf document. Requirements: Computer with Windows7 or higher and internet access.(XP also supported look in the help/manual) Flightsimulator MSFS2020, P3D, FSX(Steam), or FS2004 and FSUIPC installed. Note: requires paid activation for full use of the Flight Analyzer and Logbook. Register and you have 1 month free. Program fully works without registration at airport Athens and Iraklion (Greece). By Evander Tholen.

Pushback Helper v2.1

Images related to this file:

• _385553-1.jpg

File Description: Pushback Helper is an application to make push back operations easier. - You no need to contact ATC for jetway connection - You no need to contact ATC for using push back - You no need to contact ATC for turning - Pushback tug and forklift is connecting if you are close to vehicles - It also works if there is no any push back vehicle v2.1 Changes [FEATURE] Jetway button added to manage jetway connection. [FEATURE] Close button added to exit application. [FEATURE] Moving UI is possible now. Just hold left click on the gray area between jetway and close buttons to move it. [FEATURE] When you close the application last location is being saved and restored when you start application. [FEATURE] MSFS connection status text moved to top of aircraft image and it is more readable now. [BUGFIX] Crash to desktop when click buttons before app connects to the sim is fixed.

Filename:	pushbackhelper_v2.1.zip
License:	Freeware
Added:	28th September 2020, 18:41:34
Downloads:	415
Author:	Metin Dikbas
Size:	165kb

Pushback Helper

Images related to this file:

• -1.jpg
• -2.png

File Description: Pushback Helper is an external application which helps you to manage push back operations by clicking simple buttons. You have no need to change radio frequency to use push back inside the sim. Both push back tug and forklift is supported. If you are close enough to these vehicles, they will come and connected to your aircraft when you toggle. To show/hide main UI simply press Page Up key. This project is open source under GNU license. Project page: https://github.com/metindikbas/msfs-pushback-helper-app

Filename:	pushbackhelper_v2.0.zip
License:	Freeware
Added:	26th September 2020, 19:44:08
Downloads:	224
Author:	Metin Dikbas
Size:	165kb

Random Flight Database 3.5.2

File Description:
Random Flight Database is a simple and easy to use application. ​ It will allow you to randomly choose one or more VFR, IFR flights according to your criteria (type of plane, flight time, company, distance, departure airport, .....). ​ These flights are chosen at random from a default database, a user base created by yourself or according to the world aviation POIs. ​ A default database is already included, but also the possibility for each user to create his own database. ​ But that's not all, you can also extract the flights of the day for an airport, or extract the flights for a whole week. Why Use RFD ? The advantage of RANDOM FLIGHT DATABASE: Extracted from FlightRadar but also from other databases, it chooses randomly among those where these databases according to your choices. You can also make many other possible combinations, such as leaving each time from the arrival airport for each flight generated, but also selecting your favorite planes and airports. Simply choose the departure airport, he chooses the arrival airport for you, choose the arrival airport, he chooses the departure airport for you and all this according to the real data of the airlines. A tab for generating non-real flights is available, it will allow you to generate random flights from over 58,000 global aviation POIs. ​ Full of possibilities, including the possibility to choose the flight time but also to generate several flights while leaving the arrival airport. You also have the option of creating your own data for inclusion in this software. And one of the most important is that once the flight (s) are generated, you can send them to SIMBRIEF or PFPX to schedule this.

Random Flight Database 3.5.2

File Description:
Random Flight Database is a simple and easy to use application. ​ It will allow you to randomly choose one or more VFR, IFR flights according to your criteria (type of plane, flight time, company, distance, departure airport, .....). ​ These flights are chosen at random from a default database, a user base created by yourself or according to the world aviation POIs. ​ A default database is already included, but also the possibility for each user to create his own database. ​ But that's not all, you can also extract the flights of the day for an airport, or extract the flights for a whole week. Why Use RFD ? The advantage of RANDOM FLIGHT DATABASE: Extracted from FlightRadar but also from other databases, it chooses randomly among those where these databases according to your choices. You can also make many other possible combinations, such as leaving each time from the arrival airport for each flight generated, but also selecting your favorite planes and airports. Simply choose the departure airport, he chooses the arrival airport for you, choose the arrival airport, he chooses the departure airport for you and all this according to the real data of the airlines. A tab for generating non-real flights is available, it will allow you to generate random flights from over 58,000 global aviation POIs. ​ Full of possibilities, including the possibility to choose the flight time but also to generate several flights while leaving the arrival airport. You also have the option of creating your own data for inclusion in this software. And one of the most important is that once the flight (s) are generated, you can send them to SIMBRIEF or PFPX to schedule this. https://www.youtube.com/channel/UC8y3mSeP-gj-h2MbMT59AOw