B737 Head-Up Guidance System (HGS) Model 2350

File Description:
This gauge has been developed for FSX Flight Simulator Acceleration. It should also work with FSX SP1/SP2 . The functionality of this gauge is based on the Rockwell Collins HGS which is designed for the B737NG . It works correct for FSX B737-800 models only !! The gauge has been developed as close as possible according to the HGS Pilot Guide from Rockwell Collins for normal operations. The HGS can be used during all phases of flight from takeoff to landing. This can include Ground Roll Guidance, all enroute operations and either non-precision or precision approaches. This gauge is very realistic. It supports the pilot particular during approach operations to meet always precise the runway touch down zone by keeping a 3° glide slope angle. Even for a visual approach maneuver the HGS supports the pilot to establish and maintain the aircraft on the proper glide path to the runway without reference to a ground based landing system like ILS. Technical descriptions and installations guide are included in the zip file for further information. You may also look at a video under this link: https://youtu.be/mw4Q_eOWYtk

B737-800 EICAS FSX model for Saitek Pro Flight Instrument Panel

Images related to this file:

• b737_800_real-1.jpg
• b737_800_real-2.jpg

File Description: This other version of the B737-800 EICAS is the exact replica of the gauge provided with FSX and adapted for the FIP. I created this version just to test the possibility to use circular images as for the N1, EGT and fuel gauges. Not so easy but time is the main factor for success. It comes in two versions, one that shows the fuel flow (to be multiplied by 1000 like the FSX gauge) and the fuel tanks in pounds. The second version shows the fuel flow (no multiplier) and the fuel tanks in gallons. The gauge provides TAT, N1, EGT, N2, Fuel flow, oil pressure, oil temperature, engine vibration, center, right and left fuel tanks quantity. Additionally it provides the possibility to move the N1 green bug (unfortunately decimal for autopilot values is not available for FSX). Two warnings for each engine also appear: start valve open and low oil pressure.

Filename:	b737_800_real.zip
License:	Freeware
Added:	9th July 2013, 01:51:10
Downloads:	672
Author:	Philippe Verhaege
Size:	149kb

Baron Digital Engine Panel for FIP

Images related to this file:

• baron_digit_engine-1.jpg
• baron_digit_engine-2.jpg

File Description: For Saitek Pro Flight Instrument Panel. This folder contains two engine panels, digital type, for Beech Baron. The difference between the two panels is the position of the fuel tank gauge, oil gauges, trims, flaps and gears lights. The package includes a serie of coloured needles that can be changed easily, just replace the default needle by the one of your choice. Default needles are white for left engine parameters and blue for right engine parameters. Left tank needle is green (more visible), right tank needle is blue. Both Baron_digit_engine.xml provide: Manifold pressure, Fuel flow, Oil temperature, Oil pressure, Propeller RPM, Cylinder Head Temperature, Exhaust Gas Temperature, Fuel level for the left and right tanks, Pitch, Rudder and Aileron trims, Gears down and in transit lights, flaps positions and in transit lights.

Filename:	baron_digit_engine.zip
License:	Freeware
Added:	31st March 2012, 14:35:58
Downloads:	481
Author:	Philippe Verhaege
Size:	931kb

Beachcraft Baron 58 AP-Alt-VS-Fuel Gauge v1

Images related to this file:

• bb58_ap_alt_vs_and_fuel_v1-1.gif

File Description: This gauge is for use in the Saitek FIP and has been developed specifically for the Baron 58 (FSX default) but also works fully with the E55. The gauge looks nothing like what you will find in the BB58 but I have incorporated the components that are found at the lower right side of the control yoke. It has been designed to complement the Saitek AP / Multi panel and to fit between the yoke and the multi panel. The gauge is primarily to show the selected AP Altitude and Vert Spd whilst the AP / multi panel is displaying HDG. Placing it to the left of the AP / multi panel and at lower right side of the yoke puts all the elements of this gauge in roughly the position they would be found in a BB58. The 5 light indicators are just an addition I thought would be handy to have. The landing light indicator is right next to the landing gear warning lights and acts as a reminder to have them on by the time the gear goes down.

Filename:	bb58_ap_alt_vs_and_fuel_v1.zip
License:	Freeware
Added:	6th July 2014, 14:12:53
Downloads:	182
Author:	Robert Budd
Size:	283kb

Beaver DHC 2 engine panel for FIP

Images related to this file:

• beaver_engine-1.jpg

File Description: For Saitek Pro Flight Instrument Panel. This is folder contains an engine panel, digital type, for De Haviland Beaver DHC2. The package includes a serie of colored needles that can be changed easily, just replace the default needle by the one of your choice. Default needles are yellow except for RPM which colour doesn't need to be changed and provide more visibility in small gauges. Beaver engine provides: Manifold pressure, Exhaust Gas Temperature, Fuel flow, Oil temperature, Oil pressure, Propeller RPM, Fuel quantity for the 3 tanks, Flaps position needle and trim for Pitch, Rudder and Aileron.

Filename:	beaver_engine.zip
License:	Freeware
Added:	11th March 2012, 00:41:07
Downloads:	301
Author:	Philippe Verhaege
Size:	804kb

Beaver Engine Panel for FIP v2

Images related to this file:

• beaver_v2-1.jpg
• beaver_v2-2.jpg

File Description: For Saitek Pro Flight Instrument Panel. This is folder contains a second version of the engine panel, digital type, for De Haviland Beaver DHC2. After some comments I added a water rudder warning light which light up in blue when the water rudder is unlocked and in down position. If you already use the Beaver FIP, I recommend to overwrite the previous needles by those coming with this version and which are updated. The package includes a serie of colored needles that can be changed easily, just replace the default needle by the one of your choice. Beaver_engine_v2.xml provides: Manifold pressure, Exhaust Gas Temperature, Fuel flow, Oil temperature, Oil pressure, Propeller RPM, Fuel quantity for center tanks 1, 2 and 3, Flaps position, Pitch, Rudder and Aileron trims, Water rudder warning light.

Filename:	beaver_v2.zip
License:	Freeware
Added:	31st March 2012, 16:22:19
Downloads:	287
Author:	Philippe Verhaege
Size:	815kb

Beech Baron engines gauge flaps landing gear and pitch trim for pf instrument panel

File Description:
This gauge provides all essential engines' indications, engines RPM, Manifold pressure, fuel flow and also the fuel tanks levels, flaps positions, Pitch TRIM and landing gear position. Red needles are for left engine and green needles are for right engine. Information in English and French

Beechcraft 18DS auto-smoke gauge for FSX

Images related to this file:

• beechcraft_18ds_auto-smoke_gauge_for_fsx-1.png

File Description:
This gauge will make a little smoke effect out of both engines just like in the real world The auto smoke is generated by an xml-gauge and wil switch the smoke on above a throttle level off approx 60 percent.

Beechcraft Baron 58 FULL Engine Gauges for Saitek FIP's

Images related to this file:

• baron_engine_gauges-1.gif
• baron_engine_gauges-2.gif
• baron_engine_gauges-3.gif

File Description: 10 Left/Right analog Engine Gauges plus Fuel Level for the Beechcraft Baron 58 across 3 Saitek FIP's. I recommend these if you have 9 or more Saitek FIP's. However you can always scroll through the 3 gauges if you have less. These compliment Philippe Verhaege's fantastic Beechcraft Baron 58 main gauges "essential_gauges.zip" nicely. I grouped the Left/Right Manifold Pressure and RPM onto the first Saitek FIP. The Fuel Flow and Cylinder Head/Exhaust Gas Temperature onto the second. The Oil Temp/Pressure onto the third. Since there was room and they are directly below the engine gauges, I also incorporated the Fuel Level gauges. The beautiful Freeware gauge artwork is by Laurent Ferrari (FlyFrog) of the www.thegaugesfactory.org (Website now dead). They even have the "Beechcraft" logo. Laurent's gauges were originally designed for high end custom cockpit gauges that I resized and configured to fit the Saitek FIP's. I customized XML's to position and calibrate to Flight Simulator X. Thanks to Horacio for providing the original artwork via a zip file. Installation requires simple copy and paste. These were only tested on a Windows 7 computer with a X99 i7-5960X processor. You may have to adjust the needle reaction speeds for your machine.

Filename:	baron_engine_gauges.zip
License:	Freeware
Added:	19th March 2015, 09:44:28
Downloads:	300
Author:	Jack Pickett, Laurent Ferrari
Size:	681kb

Beechcraft King Air C90 GPU Upgrade

Images related to this file:

• gpu_powerpack_for_carenado_c90_v1-1.jpg

File Description:
This gauge add a GPU to the carenado C90, that can be used to charge the battery. Credit to Doug Dawson for his battery charger dll gauge that made this possible.