Category: Flight Simulator X - AFCAD Files
Robert J. Miller Air Park Airport (KMJX), NJ

File Description:
Located 05 miles SW of Toms River, New Jersey on 232 acres of land, R.J. Miller Air Park is a public asphalt strip 5949' in length. The airport buildings and immediate surrounding area have been included, magnetic variation adjusted, PAPI properly placed, taxiway lines drawn accurately, beacon properly placed, lit winsock and wind tee (both functional). The parking available has been matched to the current configuration of the airport, which is still undergoing renovation. Not included is the under-construction building just to the south of the terminal and the additional large hangar just north of the already-existing one. Taxiway lighting could not be seen in aerial photos - complete liberty on behalf of the author was taken when placing taxiway lights. Helipad is lit at night although the real world pad is not. Tiedown parking is available on the main tarmac in three sections: Southwest, Northeast, and regular Parking which is in the middle. RAMP_GA_SMALL parking spots are for aircraft with wingspans no greater than 40 feet. RAMP_GA_MEDIUM parking spots are for aircraft with wingspans no greater than 60 feet. RAMP_GA parking spots are occupied/blocked by static objects and should not be chosen as a start location (although collision detection with all such objects has been disabled). There are 4 open hangars - three to the Southwest are for RAMP_GA_SMALL aircraft while the Northeast one is for RAMP_GA_MEDIUM aircraft or smaller. All hangar parking spots are labeled DOCK_GA. A hangar on the main tarmac and a hangar on the tarmac to the south and west removed from the airport have attendants that can be called on NAV2 - this appears to be FS9 only. Both hangars have undecorated interiors and no parking spots to start from. There is only one helipad to start on but helicopters can also start in any RAMP_GA_MEDIUM location with no problem. Fuel for aircraft/helicopters is available by stopping next to the fuel pumps (not the fuel tank) at the north end of the main tarmac. The helipad will supply fuel when landed on. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Robert_J_Miller_Air_Park_Airport_KMJX_NJ.zip
License:	Freeware
Added:	4th August 2011, 21:45:08
Downloads:	372
Author:	Drew Sikora
Size:	2.22 MB

Category: Flight Simulator X - AFCAD Files
Paramount Bistcho, Alberta, Canada

File Description:
The AFCAD (ADE) for Paramount Bistcho was left out of our Sunwest Aviation Summer 2011 flightplan & repaint package. One of the destinations for Sunwest's B1900Ds is Paramount Bistcho in Northern Alberta. It's assigned designator is CPB8 but in both FS9 & FSX CPB8 is given to Rodney, Ontario (which should be CPU3). It is impossible to change a "stock" airport's designator in FS so we have designated Paramount Bistcho as CPB1 which is a designator not used in the real world at this time. Produced with ADE v1.50.01.

Filename:	Paramount_Bistcho_Alberta_Canada.zip
License:	Freeware
Added:	10th September 2011, 16:39:08
Downloads:	176
Author:	Steve Lewis & Darren Belanger
Size:	3 KB

Category: Flight Simulator X - AFCAD Files
KGRB - Green Bay Wisconsin Austin Straubel International U.S.A. - Updated

Images related to this file:

File Description: A complete re-make of the default airport from scratch utilising Airport Design Editor 1.47.11. Newly modeled terminal buildings were added (modeled for the airport in FSDS) and aprons and taxiways adjusted along with new taxi signs and lights added to aprons. Gates are accurately numbered and coded for correct use and all approaches have been re-written to the current Jeppesen plate. Many buildings and airport scenery elements, including a landclass, are incorporated. The file has very specific installation instructions - please read and follow these carefully. Visit us at www.alpha-india.net. This update corrects a compile error for non-crosswind runway users and corrects hangar texture issues on the GA area for all users.

Filename:	KGRB__Green_Bay_Wisconsin_Austin_Straubel_Internat.zip
License:	Freeware, limited distribution
Added:	2nd July 2011, 20:15:04
Downloads:	1,385
Author:	Patrick Finch & Alpha India Group
Size:	1.89 MB

Category: Flight Simulator X - AFCAD Files
KHSV - Updated

File Description:
This is the update of my previous FSX AFCAD for the default airport KHSV (Huntsville-Intl-Jones-Airport) located at Huntsville, Alabama. The AFCAD was modified using ADE v1.37 and includes changes per FAA charts, and as seen from above using Google Earth. The original control tower has been removed, a helipad with night lights and some static aircraft have been added in its place. The real airport does not have a helipad. Also I added a Fire Station and roadways like the real airport. Additional information is included in the AFCAD readme!.txt zip file. This AFCAD has not been tested in Flight Simulator 2004 and you do not need my previous KHSV files for this AFCAD update to work.

Filename:	KHSV__Updated.zip
License:	Freeware
Added:	3rd July 2011, 03:16:57
Downloads:	376
Author:	Leroy Mears
Size:	32.68 KB

Category: Flight Simulator X - AFCAD Files
Trenton-Robbinsville Airport (N87), NJ v1.1

File Description:
Located 01 miles E of Robbinsville, New Jersey on 139 acres of land, Trenton-Robbinsville Airport is a public asphalt strip 4275' in length. Airport improvements over stock include non-precision runway markings added, PAPI lights placed accurately and glide slopes adjusted, segment circle rendered and all parking locations placed. If a parking spot is labeled RAMP_GA it is occupied or blocked by a static scenery object and should not be selected by the user. (All static scenery by parking locations has collision disabled). All tiedown locations are RAMP_GA_SMALL that can accommodate planes with wingspans up to 40 feet. There is hangar parking, noted by a DOCK_GA parking identifier, that can handle aircraft with wingspans up to 60 feet. Fuel is available by stopping next to the fuel tank in the middle of the tarmac area. Windsock (wind tee within seg circle) is out of service indefinitely. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 002. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	TrentonRobbinsville_Airport_N87_NJ_v11.zip
License:	Freeware
Added:	17th July 2011, 02:18:52
Downloads:	208
Author:	Drew Sikora
Size:	965.92 KB

Category: Flight Simulator X - AFCAD Files
B J Farms Airport (NJ06), NJ

File Description:
Located 03 miles E of Shiloh, New Jersey, B J Farms Airport is an undefined grass strip 1500' in length. Because it is not a visible strip, this scenery removes the default grass runway that is located there. If you are looking to visit this area, JY17 is less than 1 mile away. (http://www.mseairports.com/index.php?page_id=781) Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	B_J_Farms_Airport_NJ06_NJ.zip
License:	Freeware
Added:	14th June 2011, 02:15:45
Downloads:	163
Author:	Drew Sikora
Size:	179.16 KB

Category: Flight Simulator X - AFCAD Files
Matthews Airport (NJ09), NJ

File Description:
Located 03 miles S of Belvidere, New Jersey, Matthews Airport is a private turf strip 2000' in length. No services are offered for transient aircraft. A parking spot is available for users to start on the concrete pad in front of the hangar. Field is not lit, daytime VFR only is recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Matthews_Airport_NJ09_NJ.zip
License:	Freeware
Added:	14th June 2011, 06:09:05
Downloads:	272
Author:	Drew Sikora
Size:	572.92 KB

Category: Flight Simulator X - AFCAD Files
ZHHH Wuhan-Tianhe

Images related to this file:

File Description: ZHHH Wuhan - Tianhe airport (China) enlarged and adapted to its present condition according to what can now be seen on Google Earth.

Filename:	ZHHH_WuhanTianhe.zip
License:	Freeware
Added:	23rd June 2011, 09:59:18
Downloads:	918
Author:	Yves Flinn
Size:	36 KB

Category: Flight Simulator X - AFCAD Files
Long Beach Airport Updated

File Description:
This file contains the updated Long Beach Airport ( upto 6/30/11 ) Runway 25L now has a threshold, 34R does as well. Runway 30 has been resized to the current size in the FAA Facility's Directory. This was the first airport I have updated and would love feedback to my email: [email protected]. This is an awesome airport with rich history and I would recommend anyone flying into the LA area to check it out. Also where I have done my flight training.

Filename:	Long_Beach_Airport_Updated.zip
License:	Freeware
Added:	26th June 2011, 05:06:58
Downloads:	320
Author:	Mitchell Lancaster
Size:	15.97 KB

Category: Flight Simulator X - AFCAD Files
Linden Airport (KLDJ), NJ v1.1

File Description:
Located 01 miles SE of Linden, New Jersey on 188 acres of land, Linden Airport is a public asphalt strip 4137' in length. Numerous changes have been made to this airport to bring it closer to its real-life counterpart including proper non-precision runway markings for R09 while only basic markings are used for R27; The 4-box VASI has been accurately located; the traffic pattern height has been adjusted; All 130 tiedown locations have been accurately placed. RAMP_GA spots are taken by static aircraft (all of which have collision disabled) so they should not be selected unless you want to start inside another aircraft! RAMP_GA_SMALL spots can be occupied by aircraft with wingspans up to 40 feet and RAMP_GA_MEDIUM spots can be occupied by aircraft with wingspans up to 60 feet. There are 4 open hangars labeled as GA_DOCK. The main hangar (NW Parking) can hold aircraft with wingspans up to 60 feet. The three smaller hangars (SW Parking) can hold aircraft with wingspans up to 35 feet. The W Helipad start location will put you in front of the smaller main tarmac hangar within the coned-off section. Fuel is only available by taxiing to a stop in front of either fuel tank to the west of the main tarmac. No AI aircraft will spawn in the SW Parking area. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Linden_Airport_KLDJ_NJ_v11.zip
License:	Freeware
Added:	28th June 2011, 00:03:41
Downloads:	511
Author:	Drew Sikora
Size:	1.23 MB