Category: Flight Simulator X - AFCAD Files
Stallone Airport (9NJ5), NJ

File Description:
Located 01 miles SE of Harrisonville, New Jersey, Stallone Airport is a private turf strip 1350' in length. However it should be noted that the actual length from the road to the trees on the opposite end of the runway is actually only around 900'. It is tightly hemmed in by trees so if you are landing on Runway 29 you may want to use Slew to turn your plane around to remove the risk of bumping into a tree instead. If you land on Runway 11 you can cross the road to turn around in the field opposite the runway. The windsock can be seen from both runways. Power lines run along the heights of the trees as well for the Runway 29 approach, on the same side as the trees though so not really any additional worry there. No transient services are available. There is no hard surface runway so make sure your terrain mesh slider is set as high as possible for a suitably bumpy ground experience. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Stallone_Airport_9NJ5_NJ.zip
License:	Freeware
Added:	5th April 2011, 07:34:54
Downloads:	170
Author:	Drew Sikora
Size:	332.91 KB

Category: Flight Simulator X - AFCAD Files
Halka Nurseries Airport (9NJ6), NJ

File Description:
Located 02 miles W of Fairton, New Jersey on 150 acres of land, Halka Nurseries Airport is a private turf strip 2400' in length. The airspace has been analyzed and deemed suitable for aircraft up to a light twin. Take caution on the Runway 18 approach as power lines are strung up along the street opposite the runway. There is no hard surfaced runway so have your terrain mesh set as high as possible to experience bumpy terrain. There is no windsock, so be sure to know your weather before arriving or departing - the winds in this area are predominantly out of the west and this runway is north/south. Trees and bushes are close to some areas of the runway and can pose a danger in high crosswinds. There are no services for transient aircraft. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Halka_Nurseries_Airport_9NJ6_NJ.zip
License:	Freeware
Added:	6th April 2011, 03:27:56
Downloads:	207
Author:	Drew Sikora
Size:	829.12 KB

Category: Flight Simulator X - AFCAD Files
High Meadow Farms Airport (9NJ8), NJ

File Description:
Located 02 miles SW of Hope, New Jersey on 88 acres of land, High Meadow Farms Airport is a private turf strip 1850' in length. Take notice that the traffic pattern for Runway 13 is Right while the pattern for Runway 31 is Left. There is no hard surface runway so have your terrain mesh set as high as possible. There is tie down space available next to the paved area by the other parked aircraft however there are no official services offered for transient aircraft. This is a great airport to depart from to see some nice hilly terrain in northern NJ, it is just a few miles from the Delaware River Water Gap. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	High_Meadow_Farms_Airport_9NJ8_NJ.zip
License:	Freeware
Added:	7th April 2011, 00:16:49
Downloads:	200
Author:	Drew Sikora
Size:	641 KB

Category: Flight Simulator X - AFCAD Files
Newton Airport (3N5), NJ v1.0.1

File Description:
Located 03 miles S of Newton, New Jersey on 90 acres of land, Newton Airport is a public airstrip. No services are offered for transient aircraft. Trees are summertime ONLY. Scenery constructed with use of satellite images/streetview, the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place. Visit http://www.blade-edge.com/MSEAirports/?page_id=223 for more information and pictures. Revision Notes: Moved mis-placed start location to runway

Filename:	Newton_Airport_3N5_NJ_v101.zip
License:	Freeware
Added:	15th January 2011, 02:43:50
Downloads:	213
Author:	Drew Sikora
Size:	884.5 KB

Category: Flight Simulator X - AFCAD Files
Essex County Airport (KCDW), NJ

File Description:
Located 02 miles N of Caldwell, New Jersey on 275 acres of land, Essex County Airport is a public airport with two asphalt runways, the longest of which is 4552'. Major changes include Runway 9/27 updated to the current 10/28; Runway 4/22 markings are custom made to match the real world, with threshold stripes on Runway 22 only; the beacon has been relocated to its real world location atop the control tower. Additionally, 221 parking locations have been accurately placed around the airport, broken up into 6 sections. See the included airport diagram that labels the various parking areas. 89 of these parking spaces are labeled RAMP_GA and these spaces are occupied by static aircraft. Collision with all static aircraft is disabled but still, if you do not want to start occupying the same space as another airplane, do not choose parking spots labeled RAMP_GA. Instead, all user aircraft should choose either RAMP_GA_SMALL (for wingspans up to 40') or RAMP_GA_MEDIUM (for wingspans up to 60' and only available in East Parking). Also, only 86 of these parking spaces are available for AI aircraft to spawn in. There are hangars available to transient aircraft: the two in South and Southeast parking are able to accommodate small craft with wingspans up to 40'; the one in Northeast parking is able to accommodate larger aircraft with wingspans up to 54'. Helicopters can start either on Taxiway P (South helipad), Taxiway N (North helipad) or in front of the main terminal (East helipad). Fuel is available in both the East and South parking areas by stopping anywhere on the concrete next to the fuel tank/pump. Take note that the runway patterns are both Left and Right and the pattern altitude varies for aircraft type. There are known issues with the AI for this airport, see the ReadMe for more details. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Essex_County_Airport_KCDW_NJ.zip
License:	Freeware
Added:	14th April 2011, 01:50:13
Downloads:	416
Author:	Drew Sikora
Size:	2.4 MB

Category: Flight Simulator X - AFCAD Files
KLAX Los Angeles International Airport

File Description:
All Gates In Use; 2 A380 Gates; New Taxiways Included; New Airlines Included; All Runways In Use.

Filename:	KLAX_Los_Angeles_International_Airport.zip
License:	Freeware
Added:	16th April 2011, 11:58:31
Downloads:	1,230
Author:	Cesar Robles
Size:	51.22 KB

Category: Flight Simulator X - AFCAD Files
Barbados International Airport TBPB v2.0 - Updated

File Description:
Updated AFCAD file for Grantley Adams International Airport for FSX Version 2. Fixes - Adjusted Gates 9 and 10 to Medium from Heavy to ease congestion of heavy aircraft across apron - Adjusted taxi widths and gate widths - Fixed disappearing AI after landing due to wrong taxiway widths. Requires tbpb-fsxv200.zip

Filename:	Barbados_International_Airport_TBPB_v20__Updated.zip
License:	Freeware
Added:	17th April 2011, 05:11:54
Downloads:	2,353
Author:	Max Kraus
Size:	14.27 KB

Category: Flight Simulator X - AFCAD Files
Var-Sky Airport (JY08), NJ

File Description:
Located 02 miles E of Woodstown, New Jersey on 38 acres of land, Var-Sky Airport is a private turf strip 1165' in length and a slightly challenging approach with trees closely bordering the sides of both runway ends. This airport has lighting on the runway however there is no beacon and the windsock (located atop the hangar) is not lit. There are no services offered for transient aircraft. There is no hard surfaced runway so having your terrain mesh settings as high as possible is recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 004. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	VarSky_Airport_JY08_NJ.zip
License:	Freeware
Added:	19th April 2011, 06:21:50
Downloads:	195
Author:	Drew Sikora
Size:	361.96 KB

Category: Flight Simulator X - AFCAD Files
Paramount Air Airport JY04 , NJ

File Description:
Located 01 miles N of Green Creek, New Jersey on 20 acres of land, Paramount Air Airport is a private turf strip 2000' in length, although about 300' of it at the end of Runway 32 isn't in the best shape. The runway is 100' wide but closely hedged in by trees along both sides for the length of the runway. A hangar is past the end of Runway 14 but no services are offered for transient aircraft. Still, you can choose to start parked at the hangar if you wish. There is no hard surfaced runway so having your terrain mesh set as high as possible is recommended. No windsock is present, so know your weather (KWWD is very close by) and the airport is unlit so daytime VFR operations only are recommended. Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New Jersey/Delaware 005. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Paramount_Air_Airport__JY04__NJ.zip
License:	Freeware
Added:	20th April 2011, 16:42:48
Downloads:	179
Author:	Drew Sikora
Size:	418.37 KB

Category: Flight Simulator X - AFCAD Files
Weiss Farm Airport (JY24), NJ

File Description:
Located 02 miles W of Allamuchy, New Jersey on 264 acres of land, Weiss Farm Airport is a private turf strip 1800' in length. The published width is 50' but you really have closer to 100' to play with. There are no services offered to transient aircraft but you can start parked next to the barn if you wish to taxi out to the runway. No hard surfaced runway is used to have your terrain mesh set as high as possible the start of Runway 23 is a bit slanted and bumpy so you may want to aim long on your approach. The airport is unlit so daytime VFR operations only are recommended.

Scenery constructed with use of satellite images/streetview/aerial photos - the author has not been there in person. This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Filename:	Weiss_Farm_Airport_JY24_NJ.zip
License:	Freeware
Added:	21st April 2011, 10:09:59
Downloads:	192
Author:	Drew Sikora
Size:	593.91 KB