Fly! II Boeing 747-300

File Description:
B747-300 IBERIA for FLY-2! VERSION 1.0 APRIL 2002 Boeing 747-300 in Iberia Livery with true four engine performance. See B747readme.txt for full information and installation instructions.

Scottish Aviation Twin Pioneer

File Description:
This model of the Scottish Aviation Twin Pioneer was produced using Truespace 4.0 and Chris Wallace's 3ds to S3d converter. It features fowler flaps and fullspan leading edge devices, opening main entry door. Landing can be challenging. I hope it gives added enjoyment to your simming.

SOCATA TB10

File Description:
PC only : New Socata TB10 with rounded upper panel gauges and auto Tab feature.

Hawker 610

Images related to this file:

• hawkr610-1.jpg

File Description:
This panel modification is based on Terminal Reality Inc.(TRI) Hawker 800TR Peregrine panel. This model was intended to be a practice instrument flying platform for jet aircraft, as flying was done with round gauges. However, autopilot is installed with a main panel control head to permit use of autopilot without changing screens, or having to use the 'pause' key should the autopilot be used. A TCAS/Navigation display is also installed to make finding airfields and IFR flying easier; it also assists in joining up with dynamic scenery aircraft for formation flying.

Hawker 600/700 Series model and pilots panel

File Description:
This model has a modified HAWKER 800TR pilot's panel with round dial flight instruments to somewhat represent an earlier HAWKER 600/700 series panel. Primarily meant for practising manual instrument approach flying in a jet aircraft. Included is GPS and autopilot on the main instrument panel.

De Havilland Canada DHC2 Beaver (on floats with retracts)

File Description:
IBM PC VERSION ONLY. This file contains DLL's that are not Mac. compatible. A total of over 1500 aircraft were built. With double slotted full span flaps (drooping ailerons) and 1000lbs payload, its STOL capability, along with having a float version with retracts, made it an ideal "Bushplane" with unparalelled performance from any contempory aircraft. Many Beavers are still in use today. The model was built using Truespace 4.3 and Chris Wallace's 3ds to S3d converter. Photorealistic interior views are used with auto switching day-time/night-time main panel. The model requires that you have the Tri default aircraft installed. A few non-standard features have been included to improve the ease of operation. 1. nose wheel steering (the original uses differential braking and castoring nose gears) 2. an electric pump for hydraulics (optional on the original ) 3. a simple GPS that can be slaved to the auto pilot. (unheard of during the production life of the original but very likely to be found on any survivng present day aircraft. 4. a transponder has been added to enable IFR flights

GA8 Airvan

File Description:
The GA-8 Airvan represents the second aircraft for FLYII that Simulated Aeroflight Systems has produced. The Airvan package is actually two aircraft, both with separate visual models. One is for the Airvan passenger, the second being for the Airvan Cargo.

Pdq-3 Ultralight

File Description:
Simulated Aeroflight Systems is proud to give the FLYII community the Pdq-3 Ultralight. Includes full animation of aircraft and pilot figure. Custom panel and outside views. With a minimal instrument panel and a little over an hours endurance, at a cruise speed of 70 Kts, the plane isn't much of a touring type. It will however enable the pilot to "Stop and Smell the Roses" - POH is supplied in Word and PDF format.

De Havilland DHC 3 Otter Amphibian

File Description:
IBM PC version The De Havilland Canada DHC3 Otter was built in the mid 1950's as a workhorse for developing outback Canada. With double slotted full span flaps (drooping ailerons) and 2000lbs payload, its STOL capability, along with also having a float version with retracts, made it an ideal "Bushplane" with unparalelled performance from any contempory aircraft. This model is fully amphibious and was built using Truespace 3.2 and Chris Wallace's 3ds to S3d converter for Fly! II. The model requires that you have the Tri default aircraft installed. A few non-standard features have been included to improve the ease of operation. 1. nose wheel steering (the original uses differential braking and castoring nose gears) 2. an electric pump for hydraulics (optional on the original ) 3. a simple GPS that can be slaved to the auto pilot. (unheard of during the production life of the original but very likely to be found on any survivng present day aircraft. ) Enjoy.

Seawind 300C For Fly! II

File Description:
The Seawind 300C is a true amphibian. Originally a "kit" plane, the real Seawind is undergoing certifications for actual manufacturing. The Fly! II version is a recreation of the Kit plane, and will land and float on water tiles, thanks to the efforts of Laurent Claudet of ROTW. This was a collaborative effort, with major thanks to members of F2FDesign Group and Laurent Claudet from ROTW for their assistance in bringing this project to life! Do read the readme file for important information regarding this release.