AVSIM Library - Search Results
|
Login | Register | About logging in and out
|
Searching for: Author matching 'Holger Sandmann' in AVSIM File Library and below.
|
|
|
|
File Description: Highly detailed terrain mesh of the Mt. Everest and Kula Kangri areas, N26°-29° E85°-92°. The files in this package are based on Shuttle Radar (SRTM) Version 2 data but with many of the void areas, especially the most significant sections, filled with elevation data generated from topographic maps by Jonathan de Ferranti. While Jonathan's work is unrelated to flight simulation he kindly gave me permission to compile his data for use in FS. The result is a wonderful improvement in detail and accuracy over any existing mesh file, freeware or commercial, based on SRTM or DTED data alone. Due to the large area of the Himalayas I've compiled the source data as two separate series: the "Himalayan Peaks" series covers prominent mountains and ranges in higher detail and locally overrides any existing LOD9 terrain mesh. In addition, a LOD9 "base mesh" series covering the entire Himalayas will be available for those who do not yet have an add-on terrain mesh of these beautiful mountains.
Filename: |
fs_him_01.zip |
License: |
Freeware, limited distribution |
Added: |
9th February 2006, 22:13:00 |
Downloads: |
36926 |
Author: |
Holger Sandmann and Jonathan de Ferranti |
Size: |
53262kb |
|
Other files which are related to, or may be required by, this file:
File Description: Patch files to remove tall spike in terrain near Salzburg at N47 44´ E13 00´ and to add the missing/distorted peaks of La Grande Moucherolle at N45 00´ E5 34´ and Mont Aiguille at N44 50' E5 33'.
Requires the full version of our Alps LOD10 mesh files, alpse_fe.zip and alpsw_fe.zip. Source data by Jonathan de Ferranti, compiled for FS by Holger Sandmann. Fully compatible with FS2002. A big thank-you to those who reported the "Salzbug" and the missing peaks in the French Alps.
Filename: |
alps_up1.zip |
License: |
Freeware, limited distribution |
Added: |
9th February 2006, 15:02:59 |
Downloads: |
32227 |
Author: |
Holger Sandmann, Jonathan de Ferranti |
Size: |
2635kb |
|
File Description: This is a re-issue of my previously published landscape enhancement package for the North Cascades of northwestern Washington State, us_wa_nc.zip. These files have been edited and adjusted to be fully compatible with FSAddon's "Vancouver+ Part1" product and can be used with or without FlightOne's Ultimate Terrain USA or Canada/Alaska installed. Also included are batch files to remove incompatible flatten files from Richard Goldstein's Georender 4 "Darrington Muni", published by LAGO. Please note: don't use this package unless you have a registered copy of "Vancouver+" by FSAddon!!!
Filename: |
us_nc_vp.zip |
License: |
Freeware, limited distribution |
Added: |
19th December 2005, 21:42:33 |
Downloads: |
4153 |
Author: |
Holger Sandmann |
Size: |
11941kb |
|
File Description: This is a re-issue of my previously published landscape enhancement packages for parts of Southeast Alaska, British Columbia, Alberta, and Washington State. These files have been edited and adjusted to be fully compatible with FlightOne's "Ultimate Terrain: Canada/Alaska" product. Also, I have adjusted some of Ultimate Terrain's lake and river elevations to better fit new third-party add-on mesh files, such as the "Cordillera" mesh by FS Genesis and my freeware mesh files made for the individual coverage areas. Please note: A registered copy of "Ultimate Terrain: Canada/Alaska is required!!!
Filename: |
ut_bc_hs.zip |
License: |
Freeware, limited distribution |
Added: |
8th June 2005, 03:47:26 |
Downloads: |
7287 |
Author: |
Holger Sandmann |
Size: |
3517kb |
|
File Description: An optional add-on for my cr_gorge.zip, these files add custom AI floatplane and ship traffic on the Columbia River between Washougal and The Dalles, as well as GA flightplans for some of the smaller airfields in the coverage area. Included are the HU-16 Albatross (Greg Pepper/Warren Landis), two variants of the Monocoupe 135 (Tom Miller), a S300C helicopter on floats (Jordan Moore), as well as Hovercraft and Jetfoil vessels by Mitsuya "Hama" Hamaguchi using repaints by M. Allen Richards and Dobro. All models have custom flight models and dynamic water effects. The included AI models can be utilized in other locations for which custom AFCAD files are available. For more details on AI floatplanes and ships see my ai_ships, ai_shipx, and ai_floats.zip packages.
Filename: |
gorge_ai.zip |
License: |
Freeware, limited distribution |
Added: |
16th February 2005, 04:12:53 |
Downloads: |
5334 |
Author: |
Holger Sandmann |
Size: |
6018kb |
|
File Description: This is AI traffic pack for Bill Freeborn British Columbia scenery Add On File: bc_xp.zip =;= next important file for use this pack is Base AI float pack by Holger Sandmann File : ai_float.zip on AVSIM =;=
Pack include 82 AFCADs for Sea Plane Base included in this scenery Add ON , AI modified FDE for many Float Aircraft, from oldies Sikorsky to modern SuperOtter and fictional GA traffic for these Aircrafts.
Filename: |
bc_float.zip |
License: |
Freeware |
Added: |
17th July 2004, 18:25:16 |
Downloads: |
1682 |
Author: |
Bill Freeborn & Holger Sandmann & Vladimir Svoboda (Cesmina) |
Size: |
228kb |
|
File Description: The files in this package completely replace the FS default landscape of the North Cascades Mountains and coastal areas of northwestern Washington State. Between Bellingham and Arlington (N-S), Orcas Island and Lake Chelan (W-E) you can now enjoy your VFR flights with accurate locations of coastlines, lakes, rivers, streams, roads, railroads, and power lines, as well as land use type (landclass) and terrain (add-on mesh). Also added are the larger glaciers of the majestic North Cascades volcanoes and peaks as well as several forestry roads and clearcuts outside the National Park and Wilderness areas. Made mostly with Christian Fumey's "Ground2K4" and Jim Keir's "Slartibartfast". Fully compatible with the recent freeware LOD10 add-on meshes of the western US. Mesh and landclass files will work in FS2002 but not the special scenery enhancements.
Filename: |
us_wa_nc.zip |
License: |
Freeware, limited distribution |
Added: |
18th May 2004, 23:12:57 |
Downloads: |
14298 |
Author: |
Holger Sandmann |
Size: |
13026kb |
|
File Description: One of the main landmarks of Africa, the spectacular Victoria Falls of the Zambezi River are missing in out-of-the-box FS. With a local SRTM LOD9 mesh as a base (included) and the help of satellite imagery, maps, Ground2K4, and GMax, we did our best to model a realistic representation of the falls, the river, and the gorge, complete with custom waterfall and spray effects. The portion of the Zambezi covered in this project extends from E25 to E26.5 (more than 100km), with the falls at its center. Also included is a replacement landclass file for an area of about 20km on either side of the Zambezi River and an optional AI boat (by Lynn and Bill Lyons) cruising on the Zambezi above the falls. Tested with FS2004 only but most scenery enhancements (not the AI boat) should work just as well in FS2002.
Filename: |
vicfalls.zip |
License: |
Freeware, limited distribution |
Added: |
8th May 2004, 02:45:30 |
Downloads: |
19080 |
Author: |
Holger Sandmann and Johan van Wyk, Aeroworx |
Size: |
3586kb |
|
File Description: Replacement files for water bodies of eastern South Africa, in and near the Drakensberg Range (S28.1-29.5 E28.3-30.0). Natural and man-made lakes are now in their accurate position and elevation. Includes the Katse Dam reservoir in Lesotho as well as about 100 smaller lakes in Lesotho and western Natal not present in the FS default scenery. Based on a watermask derived from Landsat 7 ETM+ satellite data and compiled with a beta version of Jim Keir's "Slartibartfast" utility. Meant to be used with the Aeroworx SRTM LOD9 South Africa mesh.
Filename: |
natal_w.zip |
License: |
Freeware, limited distribution |
Added: |
8th May 2004, 02:43:38 |
Downloads: |
6175 |
Author: |
Holger Sandmann, Aeroworx |
Size: |
464kb |
|
File Description: This package DOES NOT contain finished FS scenery products! Instead, the three bitmaps (N44.2-45.4 W110.2-111.2) are meant to be used for FS landscape scenery design with Ground2K4 (by Christian Fumey) or similar utilities. Source data are public domain Landsat 7 ETM+ satellite images, at 15-m and 30-m ground resolution. I used professional GIS software for the geographic transformation to lat/long-WGS84 projection, and photo processing software for channel merging and image enhancements. Each image has been tested in Ground2K4 for accurate placement. Note: These images have been ECW-compressed and need special (free) software for decompressing (instructions included).
Filename: |
g2k4-bmp_yellowstone.zip |
License: |
Freeware, limited distribution |
Added: |
27th April 2004, 15:36:03 |
Downloads: |
432 |
Author: |
Holger Sandmann |
Size: |
17501kb |
|
|