|
AVSIM Library - Search Results
|
|
Login | Register | About logging in and out
|
Searching for:
Author matching 'Mario Noriega'
in AVSIM File Library and below.
|
|
|
|
|
|
|
Images related to this file:
|
File Description:
The Machine:
A fully aerobatic, very-light Jet that compares to the Bede BD-5J, but heavier and sporting two instead of one TRS-18 turbojets. Up to Mach 0.47 and 650 NM of range, with a service ceiling of 25000ft. A low stall speed (for a jet) makes the aircraft good for short field operations.
Certified for VFR operations only, yet includes a good avionics suite.
This is a "Classic" aircraft featuring "Steam" gauges and radios. Yet, controls and systems are easy to operate.
The History:
The C-22J is the last aircraft to be adorned with the legendary Caproni name. Originally known as "Caproncino", then marketed as "Ventura". A very-light jet developed in the 1980s as a military trainer, surveillance and reconnaissance aircraft. Powered by two TRS-18 turbojets fed from a dorsal NACA intake, the aircraft reached Mach 0.47 and was fully aerobatic. The airframe shows its origin in a glider design, the Caproni A-21 Calif. After the merger with SIAI Marchetti, the project was cancelled in favor of the SF-260.
The Simulation - 3D Model:
This aircraft ships with a 3-D cockpit, that incorporates realistic night lighting, in the form of a dim dome flood light, backlit gauges and luminous digital displays. The flight crew of 2 is affected by your input in the payloads menu of Flight Simulator, allowing to choose between male, female or empty seats. The Copilot Figure can be hidden with a quick click in the internal 3D view as well.
The Simulation - Realism:
This aircraft has been tuned with the invaluable help of Engineer Carlo Ferrarin, who created the real aircraft. Unique and one-off documentation has been kindly provided, and used extensively, for the creation of this product!
Just like the real aircraft, the systems are simple and of easy operation. Engines can be started with the press of a button. Systems modelling allows the following of real-world checklists as closely as Flight Simulator allows. An in-sim checklist is included, as well as a full flight manual.
The flight model is tuned with advanced aerospace techniques, resulting in a highly realistic aircraft, yet, it is very pleasant to fly, both during aerobatic displays or "A to B" cruising.
Highlights:
- High-Resolution 3D cockpit
- Full Documentation
- Aerobatic
FS-2004 Version comes with limited support and is free due to platform limitations. See Readme. FS-X & P3Dv4 (64-bit) versions are commercial products.
|
| Filename: |
mnd_c22j_fs9_v1.0.zip |
| License: |
Freeware, limited distribution |
| Added: |
7th November 2020, 18:31:45 |
| Downloads: |
599 |
| Author: |
Mario Noriega |
| Size: |
161635kb |
|
|
Images related to this file:
|
File Description:
This package contains an updated re-release of all my original Piaggio P-166 models developed for FS-2002/2004. All versions are included in a single package: P-166A, P-166BL-2, P-166CL-2, P-166M, P-166S, P-166DL-3 and P-166DP-1. The 3D models are the same, so these are fairly simple models. Yet they come with a VC (no 2D panel this time!). With respect to the original releases, they come with very much improved panels, in two flavors: Piston and Turboprop. Gauges developed by Milton Shupe & Scott Thomas for the Aero Commander / Turbo Commander Aircraft series, and Edgar Guinart López of Aeroproyecto for the Embraer 110. Other Gauges from my own Piaggio P-180 & PD-808. Also Included is a brand-new flight model redeveloped from scratch. Please refer to the Reference and Checklist pages provided via the FS Kneeboard for flying and operating instructions.
The Piaggio P-166 is a light small twin. An Exotic twin-engine prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light amphibian, which the P-166 keeps the wings, the engines and the tail planes. The first P-166A flew in November 1957. The aircraft was still in production in the early 21st century in an improved turboprop version, the P-166DP-1.
|
| Filename: |
mn_p166v2_fs9.zip |
| License: |
Freeware |
| Added: |
2nd April 2020, 17:50:35 |
| Downloads: |
422 |
| Author: |
Mario Noriega |
| Size: |
41874kb |
|
|
Images related to this file:
|
File Description:
This package contains a FS-X native conversion of all my original Piaggio P-166 models developed for FS-2002/2004. All versions are included: P-166A, P-166BL-2, P-166CL-2, P-166M, P-166S, P-166DL-3 and P-166DP-1. The 3D models are virtually the same, so these are fairly simple models. Yet they come with a VC (no 2D panel this time!). With respect to the FS-2002/2004 releases, they come with very much improved panels, in two flavors: Piston and Turboprop. Gauges developed by Milton Shupe & Scott Thomas for the Aero Commander / Turbo Commander Aircraft series, and Edgar Guinart López of Aeroproyecto for the Embraer 110. Other Gauges from my own Piaggio P-180 & PD-808. Also Included is a brand-new flight model redeveloped from scratch. The 3D models are mildly improved, with a proper pilot figure, main panel backlighting and bump-mapping. Please refer to the Reference and Checklist pages provided via the FS Kneeboard for flying and operating instructions. Models converted with Arno Gerretsen’s Model Converter X.
The Piaggio P-166 is a light small twin. An Exotic twin-engine prop that sold all over the world including America, UK, and Australia. Its origin is traced Back to the Piaggio P-136, a light amphibian, which the P-166 keeps the wings, the engines and the tail planes. The first P-166A flew in November 1957. The aircraft was still in production in the early 21st century in an improved turboprop version, the P-166DP-1.
|
| Filename: |
mn_p166_fsx.zip |
| License: |
Freeware |
| Added: |
2nd April 2020, 17:49:58 |
| Downloads: |
633 |
| Author: |
Mario Noriega |
| Size: |
57755kb |
|
|
Other files which are related to, or may be required by, this file:
|
File Description:
OSM world Updates are cumulative! Only download the latest one! October 2015: - A few missing lake polygons were fixed.
|
| Filename: |
osm_world_same_upd1.zip |
| License: |
Freeware |
| Added: |
24th October 2015, 22:01:29 |
| Downloads: |
1643 |
| Author: |
Mario Noriega |
| Size: |
176kb |
|
|
Other files which are related to, or may be required by, this file:
Images related to this file:
|
File Description:
OSM World is a community project! If you wish to help, check the documentation and contact the author!
Welcome to OSM Wold: South America! This is a vector data scenery package covering the South American area. Coastlines, Rivers, lakes, roads, railways, and power lines with detail never before seen! All in an autogen-compatible density! You can see roundabouts, train terminals, harbor areas in a resolution of a point every 10 meters. At this same resolution a vectorial city class places residential (in small and big building variations, depending on surface area) and industrial areas exactly where they are supposed to be. This gives the city areas a resolution far superior to the capacity of FS-2004 default landclass bitmaps, limited to approximately 1 Km x 1 Km squares. OSM World: South America will even give you small roads leading to small towns (even a few houses across)! From big highway intersections, including ramps, to the tiniest rural pathways covering the entire South american area! Wherever in South America you fly, there is something to see!
You can enjoy this scenery near coastlines too! harbor areas and extremely detailed coastal topology (try the southern Chile). This scenery makes sure that the ocean is always flat, you can forget about the climbing water often found around photo-sceneries! This scenery is best paired with a good set of terrain meshes (like the freeware global SRTM mesh by Stephen Rothlisberger , available here: http://simviation.com/1/fs2004terrainmesh).
|
| Filename: |
osm_world_same.zip |
| License: |
Freeware |
| Added: |
5th August 2015, 02:31:08 |
| Downloads: |
2865 |
| Author: |
Mario Noriega, Luis Miguel Hernandez |
| Size: |
65916kb |
|
|
Other files which are related to, or may be required by, this file:
|
File Description:
OSM world Updates are cumulative! Only download the latest one!
October 2014:
- !!! IMPORTANT !!! Move "Default Scenery" below "OSM World" areas!! Error in installation instructions!!
- Lake Constanz missing
- water area in Antwerp missing
- Better masking land class
|
| Filename: |
osm_world_eurw_upd.zip |
| License: |
Freeware |
| Added: |
2nd November 2014, 14:15:46 |
| Downloads: |
2550 |
| Author: |
Mario Noriega |
| Size: |
952kb |
|
|
Other files which are related to, or may be required by, this file:
Images related to this file:
|
File Description:
Read Installation instructions carefully, this is a complex scenery package!
This package includes a "Dev Kit" should you wish to expand it to other areas! Please contact me if you wish to do so! This is community effort! If we all contribute, we will hopefully have the entire world covered one day!
Welcome to OSM World: Western Europe! This is a vector data scenery package covering the western European area. Coastlines, Rivers, lakes, roads, railways, and power lines with detail never before seen! All in an autogen-compatible density! You can see roundabouts, train terminals, harbor areas in a resolution of a point every 10 meters. At this same resolution a vectorial city class places residential (in small and big building variations, depending on surface area) and industrial areas exactly where they are supposed to be. This gives the city areas a resolution far superior to the capacity of FS-2004 default landclass bitmaps, limited to approximately 1 Km x 1 Km squares. OSM World: Western Europe will even give you small roads leading to small towns (even a few houses across)! From big highway intersections, including ramps, to the tiniest rural pathways covering the entire western area! Wherever in Western Europe you fly, there is something to see!
|
| Filename: |
osm_world_western_europe.zip |
| License: |
Freeware |
| Added: |
13th October 2014, 00:18:39 |
| Downloads: |
3938 |
| Author: |
Mario Noriega |
| Size: |
281341kb |
|
|
Images related to this file:
|
File Description:
This is a LabVIEW application that converts the iFLY 737NG NavData (AIRAC Cycle) for use with the Freeware iFLY 747-400 (SP3). It requires the LabVIEW 2010 Runtime Engine ( http://joule.ni.com/nidu/cds/view/p/id/2087/ ).
The source file is provided (LabVIEW VI). The program is fully automatic. I consider this an ALPHA version. It appears to work, but needs wider testing. I cannot as well guarantee that I will be able to further develop this program in the near future. Some limitations apply to the converted data.
|
| Filename: |
ifly747proconv.zip |
| License: |
Freeware |
| Added: |
14th March 2013, 14:22:55 |
| Downloads: |
272 |
| Author: |
Mario Noriega |
| Size: |
608kb |
|
|
Other files which are related to, or may be required by, this file:
Images related to this file:
|
File Description:
This update for The Piaggio PD-808 Version 2.1 (FS-2004 Edition) brings:
- 3D models updated with full virtual cabin/cockpit for all versions (full exterior included from virtual cockpit view)
- Windshield heating does not overheat unless the external temperature is above 30^C
- Widescreen panel (4/3 version still available)
There is no need to install the "Sound system Bugfix" as it is already included in this package.
|
| Filename: |
mn_pd808_v22upd.zip |
| License: |
Freeware |
| Added: |
3rd February 2013, 20:25:19 |
| Downloads: |
640 |
| Author: |
Mario Noriega |
| Size: |
20336kb |
|
|
Images related to this file:
|
File Description:
A true FS-X SDK compliant aircraft! DX-10 Tested. Not a FS-9 Port-over!
This is a complete simulation of the Piaggio PD-808. It includes advanced engine management, realistic systems, and some failure modeling. The model features a complete 3-D virtual cockpit,and a 2-D panel. Sounds are inculded. The external model features all typical animations plus a load of custom ones. Also incluides all custom special effects, including different selectable floodlights for the virtual cockpit (by simply flicking ON the proper light switch on the cockpit itself). Plus with a fly-on-the-numbers flight dynamics file. Includes full documentation.
|
| Filename: |
mn_pd808_v22x.zip |
| License: |
Freeware |
| Added: |
3rd February 2013, 20:19:44 |
| Downloads: |
2243 |
| Author: |
Mario Noriega |
| Size: |
102109kb |
|
  |
